PPR Pipe for Hot and Cold Water with Grey Color

• Customization: Available
• Material: PPR
• Hardness: Hard Tube
• Model NO.: FT1005
• Type: Thermoplastic Pipe
• Color: Transparent
• Hollow: Hollow
• Shape: Round
• Usage: Water Supply Pipe
• Length: 4m/Bar
• Transport Package: Nylong Bag
• Specification: 20mm-160mm
• Trademark: FameTop
• Origin: China
• HS Code: 9172200
• Production Capacity: 9500000m

Product Description

PPR Pipe For Hot and Cold Water With Grey Color;
Material: Hyosung R200p from Korea;
Availalbe size:20mm-160mm;
Color:Grey,White,Green or as customerized:
Max Working Temperature: 95C
Service Life: Over 50 Years;
CE Approved;

 

ITEM	SIZE	WEIGHT(G/M)	PCS/CTN
PPR (S5| PN10 For  Cold Water,-10ºC ~50ºC)	20X2.0	110	240
	25X2.3	172	180
	32X2.9	280	100
	40X3.7	420	60
	50X4.6	640	40
	63X5.8	1000	32
	75X6.8	1420	20
	90X8.2	2030	16
	110X10.0	3000	12
	160X14.6	6250	4
PPR(S4| PN12.5 For  Cold Water,-10ºC ~50ºC)	20X2.3	130	240
	25X2.8	195	180
	32X3.6	310	100
	40X4.5	500	60
	50X5.6	755	40
	63X7.1	1180	32
	75X8.4	1600	20
	90X10.1	2280	16
	110X12.3	3230	12
	160X17.8	7470	4
PPR(S3.2| PN16 For  Hot Water,-10ºC ~95ºC)	20X2.8	153	240
	25X3.5	233	180
	32X4.4	385	100
	40X5.5	575	60
	50X6.9	867	40
	63X8.6	1410	32
	75X10.3	1855	20
	90X12.3	2853	16
	110X15.1	4200	12
	160X21.9	8870	4
PPR(S2.5 |PN20 For  Hot Water,-10ºC ~95ºC)	20X3.4	171	240
	25X4.2	273	180
	32X5.4	433	100
	40X6.7	670	60
	50X8.3	978	40
	63X10.5	1650	32
	75X12.3	2340	20
	90X15.0	3360	16
	110X18.3	4930	12

MAIN FEATURES:
Used for hot and cold water distribution systems,floor & central heating systems etc 
Smooth inside surface,lower flow noise,preventing dirt build-up inside the pipe
Long service life over 50 years
Heat preservation,and engergy-saving,heat conduct cofficient is 1/200 of that of metal pipe
Light in weight,easy to install,cost effective

Fusion Instructions:
1,Mark the pipe
Mark the pipe for depth of penetration into the heater bush and fitting (see table). The mark must remain visible under heating and joining. 
2,Heat pipe and fitting
Push the pipe and the fitting into the heating tools. Once pipe and fitting are hot (after the correct time), pull out pipe and fitting very slowly.
3,Joint pipe and fitting
Joint the pipe & the fitting and push the pipe until it reaches the mark (that has to stay outside).
During the jointing time the welded part of pipe and fitting must remain fix, without any rotation.
During the cooling time, the welded part of pipe and fitting can be adjusted until cold. 
4,Fusion inspectoin
Fusion inspection. The outer fusion seam must be inspected. The seam must be present all around the pipe.